Let me start by saying thank you, the good news is feeding ADSBexchange.com is quick and easy.
There are various options depending on what kind of feeder/receiver you use and your desired level of customization.[ ADSBx image ] If you are starting from scratch and want use ADSBx Dashboard on the Pi this is the quickest way. [ Script Method ] If you have a Pi feeder already feeding a commercial site this will send the same data to ADSBx.
ADSBx offers a custom ADSBX feeder image with stats, dashboard, maps, US sectionals, offline vector maps, and many more features!
Warning: Other site clients are not as polite as ADSBx and will occasionally try to take over your feeder, we can not always provide assistance if this happens.
To copy the image onto an SD card we suggest the use of BalenaEtcher.
READ THE ADSBX IMAGE SETUP GUIDE FOR DETAILED INSTRUCTIONS.
To test your feeder is working correctly after setup go to https://www.adsbexchange.com/myip/
ADS-B Exchange Setup Scripts
These scripts aid in setting up your current ADS-B receiver to feed ADS-B Exchange. At a minimum, you will need a Pi running any Raspbian image and SDR with dump1090 installed and configured to start at boot.
The script method for all feeders that have dump1090 outputting beast data on port 30005.
The scripts were updated to use a systemd service.
Obtaining And Using The Scripts
Running the following commands will download the contents of the repository and begin setup.
sudo apt-get install git sudo rm adsb-exchange -rf git clone https://github.com/adsbxchange/adsb-exchange.git cd adsb-exchange sudo bash setup.sh
– After completing the setup do not delete this repository. –
Stats Package – adsbexchange-stats (Optional) (For Pi feeders only) (Required for API)
Running the following commands on your Raspberry Pi will download the stats package and allow you to see your feed directly on the site.
cd /home/pi git clone https://github.com/adsbxchange/adsbexchange-stats.git cd adsbexchange-stats chmod +x install.sh sudo ./install.sh
All MLAT participants will receive a back-feed of any aircraft where their data was used in the calculations. Unlike commercial ADS-B sites, no aircraft will be censored, hidden, removed, or otherwise scrambled.
To test your feeder is working correctly, or to get your direct link if stats package is installed, go to https://www.adsbexchange.com/myip/
Other Useful commands
Display MLAT config
sudo systemctl status adsbexchange-mlat
sudo systemctl status adsbexchange-feed
sudo systemctl restart adsbexchange-feed
sudo systemctl restart adsbexchange-mlat
Finding Location & Elevation
The following website is great help finding your Lacation (Lat/Lon) and Elevation, remember the given elevation is ground so you will need to add your antenna height. https://www.freemaptools.com/elevation-finder.htm
NEED HELP? Join our Discord Chat: https://discord.gg/ErEztqg